Stair tread overhang are more comfortable

Several studies have shown that stairs with overhangs are more comfortable. However, too much overhang can become a trip hazard. People can lose their balance and fall down the stairs. Aside from safety reasons, too much overhang can cause tripping. Therefore, a proper stair tread overhang should be one inch or more. To get the best results, make sure to build your stairs according to the current building code and round the bare wood edges. Carpet will lay over the edge of these edges better.

Adding an overhang protects the treads from wear and damage

Adding an overhang protects the treads from wear and damage. The stair’s treads are often the hardest-used area. The edges of the treads are exposed to considerable force from shoes and other debris. The more overhang, the less maintenance will be required. To make your stair’s design more appealing, try incorporating trim underneath the tread at the top of the riser. You can also use staples or glue on the tread edge.

To install a stair tread overhang, first measure the tread’s depth and width. You should leave approximately one inch overhang on either side of the stair’s riser or the top of the riser. Ensure the stair’s height does not exceed one inch. You should choose a stout with a diameter of no more than six inches. Ensure that the overhang is at least one-half inch wide.

Stair tread overhang , You can easily measure the distance between the top edge of a riser and the bottom edge of the tread

You can easily measure the distance between the top edge of a riser and the bottom edge of the tread. The width of a riser’s edge should be three-quarters of the overall depth. The width of the stair tread overhang must be equal to the thickness of the riser’s bottom edge. Its minimum overhang is approximately 3/4″ to one-quarter inch. To get the exact measurements, consider the width and thickness of the finished flooring.

A stair’s tread overhang should be at least half an inch or two. You should also have at least one inch of overhang on the top and bottom of the tread. Aside from that, the overhang should be at least three inches on each side. If the overhang is too short, the tread will look sloppy and unprofessional. Alternatively, you can hire a remodeling contractor located outside the Glass City to take care of the installation for you.